External master cylinder return spring for under tank mounted master cylinder

No longer available

 Sorry, this part is no longer available.

19662600-z 19662600 GU19662600 19 66 26 00
 1966 2600 1966.2600 19.66.26.00

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Black PS 12 master cylinder (original round type). Supplied without lever. Currently unavailble- see BRA28278 for an alternative master cylinder.

Also known as Guzzi ref. 28660178, uses seal kit BRA14701 and lever BRA14605 (or BRA17606). Replaces Guzzi refs. 17660250, 17660252, 14660200, 082054335. Can be used to upgrade cable operated front master cylinder on V35 I, V50 I and V50 II models. also suitable for 750S

 1 in stock

 17660253 GU17660253 17 66 02 53
 1766 0253 1766.0253 17.66.02.53

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei

Black cast aluminium cap and plastic seal for PS 15 Brembo master cylinder reservoir, this type does not have a level switch. Can be fitted to front or rear PS15 master cylinder reservoirs

This design was originally fitted to 850T, V7 Sport, 750S and S3 but will all fit all listed models. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs.
No longer available - superceded by BRA14901

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338.

See BRA14102 for alternative aluminium cap

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders

Also known as Brembo ref. 110312720

 4 in stock

 19659500 GU19659500 19 65 95 00
 1965 9500 1965.9500 19.65.95.00

M8 x 75mm A2 stainless steel hex head bolt used as front disc bolt on some small twins and Le Mans 2 and 3. Two of these bolts used as starter motor mounting bolt on big twins fitted with Valeo starter motor

 4 in stock

 98052475 GU98052475 98 05 24 75
 9805 2475 9805.2475 98.05.24.75

Rubber bleed nipple cap with retaining ring

Suitable only for M6 bleed nipples

 More than 5 in stock

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec

Copper crush washer for brakeline connections, fits standard banjo bolt

Two M10 washers required per banjo bolt. Interchangeable with SIA10900

 More than 5 in stock

 25656100 GU25656100 25 65 61 00
 2565 6100 2565.6100 25.65.61.00

Rubber bleed nipple cap with retaining ring

Suitable only for M8 and M10 bleed nipples

 More than 5 in stock